v0767_m

warningactivewithin F 01.013 cells · specific check

Expression · DPM 2.0, verbatim

with {tF_01.01, c0010, default: 0, interval: true}: {r0270} = {r0280} + {r0290}

EBA description {r0270} = {r0280} + {r0290}

Precondition p_251 (its meaning is not in the data yet)

Cells involved

F 01.01 Balance Sheet Statement [Statement of Financial Position]: Assets

Open template →

	c0010Carrying amount
0270Total assets › Tangible assets	in rule
0280Tangible assets › Property, plant and equipment	in rule
0290Tangible assets › Investment property	in rule

Scope by module

Module	Severity	Status	From
FINREP9 3.3.0	warning	active	2026-03-31
FINREP9DP 1.0.0	warning	active	2026-03-31
FINREP9DP 1.1.0	warning	active	2026-03-31

VALIDATION RULE

v0767_m

What it is

Type: Validation rule · within one template, specific check
Release: FINREP 4.4 validation · reported from 2026-03-31
Source: DPM 2.0 4.4 · operation 15463 · official

Regulation7

From the rows and columns of the cells involved.

Annex V Part 1 §27 F 01.01 c0010
For the purposes of Annexes III and IV as well as this Annex, "the carrying amount" means the amount to be reported in the balance sheet. The carrying amount of financial instruments shall include accrued interest. Under the relevant national GAAP based on BAD, the carrying amount of derivatives either shall be the carrying amount under national GAAP including accruals, premium values and provisions if applicable, or it shall be equal to zero where derivatives are not recognised on-balance sheet.

Other acts

IAS 16.6 IAS 1.54(a)IFRS 16.47(a)IAS 40.5 IAS 1.54(b)IFRS 16.48

Controls7

7 other rules use at least one of these cells.

Other rules on the same cells

v3897_swarning3
with {tF_01.01, c0010, default: null, interval: false}: {(r0010, r0020, r0030, r0040, r0050, r0060, r0070, r0080, r0090, r0091, r0092, r0093, r0094, r0095, r0096, r0097, r0098, r0099, r0100, r0110, r0120, r0130, r0141, r0142, r0143, r0144, r0171, r0172, r0173, r0174, r0175, r0176, r0177, r0178, r0181, r0182, r0183, r0231, r0232, r0233, r0234, r0235, r0236, r0237, r0240, r0260, r0270, r0280, r0290, r0300, r0310, r0320, r0330, r0340, r0350, r0360, r0370, r0380, r0390)} >= 0
v0768_mwarning1
{r0380} = {r0010} + {r0050} + {r0091} + {r0096} + {r0100} + {r0141} + {r0171} + {r0175} + {r0181} + {r0231} + {r0234} + {r0240} + {r0250} + {r0260} + {r0270} + {r0300} + {r0330} + {r0360} + {r0370} + {r0375}
v1104_mwarning1
{F 21.00, r0010, c0010} <= {F 01.01, r0280, c0010}
v1105_mwarning1
{F 21.00, r0040, c0010} <= {F 01.01, r0290, c0010}
v2823_mwarning1
sum({F 32.01, r0120, (c0010, c0060)}) = sum({F 01.01, (r0020, r0060, r0092, r0240, r0250, r0260, r0270, r0300, r0330, r0360, r0370, r0375), c0010})
v7790_mwarning1
{F 13.02.1.a, r0010, c0020} <= {F 01.01, r0280, c0010}
v7799_mwarning1
{F 13.03.1.a, r0010, c0020} <= {F 01.01, r0280, c0010}

Interpretation—

No EBA Q&A cites this rule.

Changes—

No change to this rule between the releases loaded.

Source: the DPM 2.0 database of the release shown above (expression, description, scope, cells; official). References inherited from Annex I (verbatim) and EBA instructions 4.2; links and counts are derived.